Blog

This is a list of all the pages to sopport the first version of the Interactive Display, numbered according to the attached image from the AOI.

1. INTERNAL STORES INFORMATION PANEL
2. RADIO TRANSMISSION SELECTOR PANEL
3. RADIO RECEIVER SELECTOR PANEL
4. ICS MASTER CONTROL PANEL
5. TACCO SWITCHING AND DIMMING PANEL
6. KY-28 OR KY-58 SECURE VOICE CONTROL PANEL
7. TORPEDO PRESETTER CONTROL
8. OTPI CONTROL PANEL
9. SONOBUOY CONTROL PANEL
10. INTERNAL STORES CONTROL PANEL
11. BDHI CONTROL PANEL
12. DEPTH CONTROL STATION SELECTOR
13. EXTERNAL STORES LOAD SELECTOR PANEL
14. GROUND VELOCITY INDICATOR
15. BDHI
16. ARA AND CLOCK PANEL
17. KY-75 SECURE VOICE CONTROL PANEL
18. HF CONTROL PANEL
19. RADAR AZIMUTH-RANGE INDICATOR
20. TACCO’S TEST SWITCH PANEL
21. SONOBUOY RECEIVER CONTROL PANEL
22. SIGNAL LEVEL INDICATOR
23. FREQUENCY SELECTOR CONTROL
24. DOME CONTROL
25. SONAR OPERATOR’S PANEL LIGHTS DIMMING CONTROL PANEL
26. SIGNAL LEVEL INDICATOR
27. FREQUENCY SELECTOR CONTROL
28. SONAR HOVER INDICATOR AND SONAR RETRIEVAL SPEED OVERRIDE SWITCH
29. RADIO TRANSMITTER SELECTOR PANEL
30. ICS MASTER CONTROL PANEL
31. RADIO RECEIVER SELECTOR PANEL
32. RADIO RECEIVER SELECTOR PANEL
33. (PROVISION FOR) AQH5 RECORDER CONTROL PANEL
34. CABIN AND SONAR WELL LIGHTS CONTROL PANEL
35. CABLE PAYOUT MONITOR
36. BATHYTHERMOGRAPH RECORDER
37. SONAR RANGE DATA CONVERTER
38. TACCO TRANSMIT PANEL
39. ASN-123C DISPLAY
40. TACCO ASN-123C CONTROL PANEL
41. RADAR SET CONTROL PANEL
42. RANGE AND BEARING CONTROL PANEL
43. SENSO CONTROL PANEL
44. ICS ISOLATION SELECTOR SWITCH
45. SONAR OPERATOR’S TRANSMIT PANEL
46. SONAR INDICATOR
47. SONAR RECEIVER
48. SONAR TRANSMITTER
49. ICS/RADIO FOOT SWITCHES
50. AN/PSN-10(V) GLOBAL POSITIONING SYSTEM
51. FLIR 2000 FORWARD LOOKING INFRARED DISPLAY MONTUIOR UNIT
52. FLIR SYSTEM CONTROL UNIT

The format for displaying pages for the Interactive Display has been completed as described in Reorganized Pages.

Please review this format by looking at the following pages. To see how the format is applied to the ASN-123C system see:

• Tactical Computer
• Display Indicator
• TACCO Control
• SENSO Control

The same pages are used to populate the more complete equipment descriptions at ASN-123C Tactical Navigation System.

For an example of how the same page is used to populate multiple locations, see the TACCO versions at:

• TACCO Master Control Panel
• TACCO Transmitter Selector Panel
• TACCO Receiver Selector Panel

For the equivalent SENSO versions see:

• SENSO Master Control Panel
• SENSO Transmitter Selector Panel
• SENSO Receiver Selector Panel

Please review these pages for format (not content, which can easily evolve over time), and provide comments below.

The intent was that the descriptions would be standardized, so that both the Interactive Display pages and the Equipment pages used the same set, with the Equipment ones being amplified versions.

However, the way it was being done was creating extra effort: in order to find them, they needed more complex Titles, which meant the Titles couldn’t be used as part of the blocks.

The solution (I think) is to create a new Custom Post Type,which is heirarchical (a “Page”), grouped in “Interactive Display Items” There are three levels to this:

• The top is the System (eg the “AIC-14 ICS”)
• The middle is the Items (eg the “ICS Master Control”)
• The bottom is the locations (for Items that are used more than once in the aircraft) (eg the “TACCO ICS Master Control”)

The Eqipment pages can then embed this content (“Systems” and “Items”), without Titles if required.

The Systems already have a final field in their Themes, which shows a link to the “Consists of” Items need to show a parent link and embed the Excerpt if it exists, and “Locations” if children exist. Locations need to show the parent link and Excerpt is it exists.